Daike Carton Erecting DCE-800 & DCE-1000

Daike Carton Erecting Machine is designed according to the European standard and has been authorized the CE certification. With simple and firm structure, high quality and efficiency as well as low noise, it is an ideal choice to produce disposable snack boxes, hamburger boxes, chips boxes, etc.

Work Principle:

The feeder transmits the pre-printed and cut cardboard from the paper shelf to the convey chain and then sends it to the shaping mold. During this procedure, the cardboard has been glued and you can adjust the position of the gluing. The Volume of gluing can be measured while in progress without stopping work. After being glued, the shaped cardboard will be conveyed to a collector to be auto calculated as the preconcert quantity and auto mark without stopping production.

Paper Feeding Unit:

Paper feeding sequentially by the friction at the bottom of feeder and the feeder’s length can be adjusted. The paper can be added during producing.

Paper Transfer Unit:

The transfer width can be adjusted easily and conveniently using the threaded rod.

Glue Spreading Unit:

The Standard gluing method is cold water glue spreading by roller wheels and for any shape to be glued. The glue volume can be added during producing. Cold Glue or hot melt glue can be used for gluing.

Forming Unit:

It uses the mechanical punching forming structure. it is simple and working stable. Or you can choose the independent servo driving punching device for hamburger boxes, clam-shell boxes forming specially. A carton box with three corners, four corners, five corners, six corners, seven corners, and eight corners can also be achieved.

Finished Products/Collection Unit:

The finished boxes will be pushed into the collecting device. The size of the collector can be adjusted manually with the hand wheel. It’s simple, convenient, highly effective and affordable.

Counting Unit:

The Finished box counting is automatic and subsection by inserting piece of scrip marker. The pieces for one section or one batch can be freely set as required.

Control Unit:

It uses a PLC Automatic control system and touching screen to operate. The programmed European control system is convenient, simple, highly effective and stable.

Technical Data:
Nominal Output (Single Lane):
4 Corner Trays Without lid Max.:	11,000 pcs/h
Burger King French Fry Box Max.:	9,000 pcs/h
Hamburger Box (8 pasting) Max.	7,000 pcs/h
*The output quantity mentioned above is under normal conditions. Actual output may very on different box shape, quality of material, and its substance.
** Double lane machine has double production than single lane machine.

Producible boxes sizes and suitable materials:
Length L:	100-450mm		Taper	5-40 degree
Width B:	100-385mm		Height H	15-200mm
Width B1 (with lid):	100-580mm		Height H1 (with lid)	50-200mm

Materials: Cardboard paper and one side PE coated paper (200-600GSM)

Corrugated paper with maximum thickness 1.5mm.
*also can produce containers made by aluminum foiled paper and two sides PE coated paper with optional Hot melt system.
**Special model is also available.
Power Supply: Approx…		9 KW:
Compressed Air.		6 bar, 50NL/h

Gross Wight:
DCE – 800:	2,000KG
DCE – 1000:	2,500KG
Dimensions:	Installation Space Required:		1,800mm x 4,000mm
	Main Machine:		2950mm x1320mm x1400mm (5.45CBM)
	Control Box, rails, accessories		1250mm x 1050mm x 850mm (1.12CBM)

Features of Carton Erecting Machine:

The Carton Erecting machine is highly efficient. It can produce as many as 180 pieces per minute and finished products are automatically counted.
It is small in size and convenient to install.
It has a low power load of approximately 8KW: frequency conversion speed adjusting, smooth and stable and high precision.
The Carton erecting machine user PLC with high automation, simple operation and adjusting, low rate of fault, and convenient maintenance.
It uses a servo control system and moves precisely, smoothly, stably and with less vibration.
It is inexpensive.